The GPS Signal Splitter allows you to get more use out of a single antenna by dividing the outgoing signal into two separate GPS receivers with minimal signal loss (<4dB). The signal splitters operate over a frequency that allow the GPS, Inmarsat, Omnistar and DGPS radio Beacon signals to be passed through with efficiency and ease.
There are two choices, the Type N and Type TNC connectors, both built with rugged components that will perform no matter the operating environment: land, marine or aviation.
Downloads
2-Way GPS Signal Splitters
Part Number: BT-2DGPS
2 way signal splitter powered from a single receiver.
- Model Number: BT-2DGPS Type N
- Product Name: Prim/Sec Combiner
- Connection: N Type (BT-2DGPS-N) or TNC (BT-2DGPS-TNC)
- Weight: 4 oz
- Relative Humidity: 0-95% Non-Condensing
- Operating Temp: 0°C to +50°C
- GPS Signal Loss: < 4dB
- Isolation: >18dB (Typical)
- Depth: 1.96″
- Width: 3.00″
- Height: 1.25″Option:
- Option: Voltage: 3.3V (150 OHM DC load on Secondary Port) – BT-2DGPS-2DC-3.3
Part Number: BT-2DGPS-2DC
2 way signal splitter powered from either receiver.
- Model Number: BT-2DGPS-2DC Type TNC
- Product Name: Prim/Sec Combiner
- Connection: N Type (BT-2DGPS-2DC-N) or TNC (BT-2DGPS-2DC-TNC)
- Weight: 4 oz
- Relative Humidity: 0-95% Non-Condensing
- Operating Temp: 0°C to +50°C
- GPS Signal Loss: < 4dB
- Isolation: >18dB (Typical)
- Voltage: 3.3V
- Depth: 1.96″
- Width: 3.00″
- Height: 1.25″
- Option: Voltage: 3.3V (150 OHM DC load on Secondary Port) – BT-2DGPS-2DC-3.3